GETTING STARTED Owner manual

13-4 Using ControlLogix Gateways
These instructions show how to set up a driver for an Ethernet connection.
1.
Start RSLinx.
2.
In the
Communications
menu, select
Configure Drivers
. The Configure
Drivers dialog box appears.
3.
In the
Available Driver Types
field, select
Remote Device via Linx or
1756-ENET Gateway
.
4.
Click
Add New
. The Add New RSLinx Drive dialog box appears.
5.
Type a name (if desired), and then click
OK
. The Remote Devices via Linx
or 1756-ENET Gateway dialog box appears.