GETTING STARTED Owner manual

12-4 Using a Modem Connection
5.
Click
OK
to accept the default name. The
Configure Allen-Bradley DF1
Communications Device
dialog box appears.
Important:
Do NOT use the AutoConfigure button to set the settings for this
driver. This command does not work with a modem.
6.
In the
Comm Port
field, select the communications port that your computer
is using to access the modem.
7.
In the
Device
field, select
1770-KF2/1785-KE
.
8.
In the
Station Number
field, type your SCANport communications module
station number.
9.
In the
Baud Rate
field, select the baud rate at which your computer,
modems, and communications module are operating.
10.
Select
Use Modem Dialer
. A check mark will appear.