Manualshelf

GETTING STARTED Owner manual

ManualsBrandsRockwell Automation ManualsEquipment9303 DRIVE TOOLS 32 VER 2.50
111112113114115116117118119120
Using RSLinx Gateways 11-5
8.
Click
OK
to configure the driver. The new driver appears in the
Configured
Drivers
dialog box.
9.
Click
Close
.
Mapping the Configured Driver to the KTPort Value
After configuring the driver, you must map it to a legacy INTERCHANGE API
xKT:0 label in RSLinx so that DriveTools32 can use it.
1.
In the
Communications
menu, select
Configure Client Applications
. The
Configure Client Applications
dialog box appears.
2.
In an unused
KT:0
field, select the TC P driver.
Important:
Note the KT:0 field that you select. When you configure a
DriveTools32 application, you need to enter the field number in the
Communication Setup
dialog box.
3.
Click
OK
.