Manualshelf

GETTING STARTED Owner manual

ManualsBrandsRockwell Automation ManualsEquipment9303 DRIVE TOOLS 32 VER 2.50
101102103104105106107108109110
Setting Up Allen-Bradley Ethernet to RIO Block Transfer Pass Thru Communications 10-5
The
Configure driver for Ethernet to PLC-5 or 5820-EL
dialog box
appears.
6.
In the
Driver Station
field, enter a unique station number for your
computer on the Ethernet network. Valid numbers are from 0 to 63.
7.
In the
Current Mappings
field, select an available mapping.
8.
In the
IP Address or hostname
field, type the IP address or hostname of
the controller.
Important:
Note the IP address. When you configure a DriveTools32
application, you need to enter it in the
Communications Setup
dialog box.
9.
Click
Accept
to map the IP address to an available mapping.