QUICK START CONTROLNET NTWK

ControlNet Network Compliance Tool14
Publication 9220-10.3 — September 1997
Troubleshooting
If a test fails:
1. View the display or test log file (qtp.log) to determine which test
is failing.
2. Run the individual test mode on the test that failed.
3. Make the necessary adjustments to the DUT.
4. Run the failed test again.
For additional assistance resolving test failures, call the ControlNet
Developers Hotline at (216) 646–4200.
This version of the compliance tool software was verified using only the
default network parameters. Use of different network parameters could
result in unexpected test failures.
ControlNet is a trademark of ControlNet International.
MS-DOS and Microsoft are trademarks of Microsoft Corporation.
PC AT, VGA and VGAWonder are trademarks of International Business Machines Corporation.
PLC5 is a registered trademark of Rockwell Automation.
Worldwide representation.
Argentina • Australia • Austria • Bahrain • Belgium • Brazil • Bulgaria • Canada • Chile • China, PRC •
Colombia • Costa Rica • Croatia • Cyprus • Czech Republic • Denmark • Ecuador • Egypt • El Salvador •
Finland •
France • Germany • Greece • Guatemala • Honduras • Hong Kong • Hungary • Iceland • India •
Indonesia • Ireland • Israel • Italy • Jamaica • Japan • Jordan • Korea • Kuwait • Lebanon • Malaysia •
Mexico •
Netherlands • New Zealand • Norway • Pakistan • Peru • Philippines • Poland • Portugal •
Puerto Rico • Qatar • Romania • Russia–CIS • Saudi Arabia • Singapore • Slovakia • Slovenia •
South Africa, Republic • Spain • Sweden • Switzerland • T aiwan • Thailand • T urkey •
United Arab Emirates • United Kingdom • United States • Uruguay • V enezuela • Y ugoslavia
Allen-Bradley Headquarters, 1201 South Second Street, Milwaukee, WI 53204 USA,
Tel: [phone] Fax: [phone]
Publication 9220-10.3 — September 1997
Supersedes Publication 9220-10.3 – July 1997
PN 955130–50
Copyright 1997 Allen-Bradley Company, Inc. Printed in USA