User guide

Publication 900-UM007D-EN-E - January 2011
3-24 Configuration & Basic Operation
12. Select the Auxiliary Output 2 Assignment parameter by pressing the M
key.
Figure 3.39
13. Press the U or D key to set alm2.
(The default is alm2.)
Figure 3.40
14. Press the O key for at least 1 second to move from the Advanced
Setting to the Initial Setting function group.
Figure 3.41
15. Press the O key for at least 1 second to move from the Initial Setting
function group to the Operation function group.
Figure 3.42
sub2
alm2
Auxiliary Output
2 Assignment
sub2
alm2
Auxiliary Output
2 Assignment
in-t
5
Input type
C
25
100
PV/SP