User guide

Publication 900-UM007D-EN-E - January 2011
Configuration & Basic Operation 3-23
6. Select the Control Output 1 Assignment parameter by pressing the M
key.
Figure 3.34
7. Press the U or D key to set o.
(The default is o.)
Figure 3.35
8. Select the Control Output 2 Assignment parameter by pressing the M
key.
Figure 3.36
9. Press the U or D key to set c-o.
(When h-c is selected for the Standard or Heating/Cooling Control
Mode parameter, the setting will be c-o.)
Figure 3.37
10. Select the Auxiliary Output 1 Assignment parameter by pressing the M
key.
Figure 3.38
11. Press the U or D key to set alm1.
(The default is alm1.)
out1
o
Control output 1
assignment
out1
o
out2
c
-
o
Control Out
p
ut 2
Assi
g
nmen
t
out2
c-o
sub1
alm1
Auxiliary Output
1 Assignment
sub1
alm1
Auxiliary Output
1 Assignment