User guide

Publication 900-UM007D-EN-E - January 2011
B-10
Cold Junction
Compensation Method
cjc OFF, ON off on ON None
MB Command Logic
Switching
rlrv OFF, ON off on OFF None
PV Color Change colr Orange, Red, Green
Red to Green: When ALM1 is lit
Green to Red: When ALM1 is lit
Red to Green to Red
Within PV stable band: Green
Outside stable band: Red
Green to Orange to Red
Within PV stable band: Green
Outside stable band: Green, Red
Orange to Green to Red
Within PV stable band: Green
Outside stable band: Green, Red
org
red
grn
r-g
g-r
r-g.r
g-o.r
o-g.r
RED None
PV Stable Band pv-b Universal input: 0.1…999.9 5.0 °C or °F ➊
Analog input: 0.01…99.99 5.00 %FS
Alarm 1 ON Delay a1on 0…999 (0: ON Delay disabled) 0 Second
Alarm 2 ON Delay a2on 0…999 (0: ON Delay disabled) 0 Second
Alarm 3 ON Delay a3on 0…999 (0: ON Delay disabled) 0 Second
Alarm 1 OFF Delay a1of 0…999 (0: OFF Delay disabled) 0 Second
Alarm 2 OFF Delay a2of 0…999 (0: OFF Delay disabled) 0 Second
Alarm 3 OFF Delay a3of 0…999 (0: OFF Delay disabled) 0 Second
Input Shift Type istp INS1: Temperature input
1-point shift
INS2: Temperature input
2-point shift
ins1
ins2
INS1 None
MV at Stop and Error
Addition
mvst OFF, ON off on OFF None
Auto/Manual Select
Addition
amad OFF, ON off on OFF None
RT rt OFF, ON off on OFF None
HS Alarm Use hsu OFF, ON off on ON None
HS Alarm Latch hsl OFF, ON off on OFF None
HS Alarm Hysteresis hsh 0.1…50.0 0.1 A
Table B.F — Advanced Setting Function Group
Parameters Characters Setting (Monitor) Value Display Default Unit Set Value