User guide

Publication 900-UM007D-EN-E - January 2011
B-9
Monitor Setting Item Function Group
The contents displayed vary depending on the Monitor/Setting Value 1 to 5
(Advanced Setting function group).
Table B.F — Advanced Setting Function Group
Parameters Characters Setting (Monitor) Value Display Default Unit Set Value
Parameter Initialization init OFF, FACT off
fact
OFF None
Multi-SP Use mspu OFF, ON off on OFF None
SP Ramp Time Unit spru S: EU/second
M: EU/minute
s m M None
Standby Sequence
Reset
rest Condition A, condition B a b Condition A None
HB ON/OFF hbu OFF, ON off on ON None
Auxiliary Output 1
Open in Alarm
al1n N-O: Open in alarm
N-C: Close in alarm
n-o
n-c
N-O None
Auxiliary Output 2
Open in Alarm
al2n N-O: Open in alarm
N-C: Close in alarm
n-o
n-c
N-O None
Auxiliary Output 3
Open in Alarm
al3n N-O: Open in alarm
N-C: Close in alarm
n-o
n-c
N-O None
Heater Burnout Latch hbl OFF, ON off on OFF None
Heater Burnout
Hysteresis
hbh 0.1…50.0 0.1 A
ST Stable Range st-b 0.1…999.9 15.0 °C or °F
α alfa 0.00…1.00 0.65 None
AT Calculated Gain at-g 0.1...10.0 0.8 None
AT Hysteresis at-h Universal input: 0.1...999.9 0.8
°C or °F
➊
Analog input: 0.01...999.9 0.20 %FS
Limit Cycle MV
Amplitude
lcma 5.0...50.0 20.0 %
Input Digital Filter inf 0.0…999.9 0.0 Second
Additional PV Display pvad OFF, ON off on OFF None
MV Display o-dp OFF, ON off on OFF None
Automatic Display
Return Time
ret OFF or 1…99 off
1 to 99
OFF Second
Alarm 1 Latch a1lt OFF, ON off on OFF None
Alarm 2 Latch a2lt OFF, ON off on OFF None
Alarm 3 Latch a3lt OFF, ON off on OFF None
Move to Protect
function group Time
prlt 1…30 3 Second
Input Error Output sero OFF, ON off on OFF None