User guide

Publication 900-UM007D-EN-E - January 2011
1-10 Bulletin 900 Input & Output Overview
Table 1.E — Controller Option Units
900-TC32
Table 1.F — Controller Versions
Heater
Burnout Event Out Comms
Voltage (SSR)
Control Output 2
Cat. No. for Enhanced
Option Units Series
1-Phase HB — RS485 — 900-TC16NCOM B
— — RS485 — 900-TC16NACCOM
1-Phase HB Yes — — 900-TC16NEIM
— Yes — — 900-TC16NACEIM
3-Phase HB — RS485 — 900-TC16NCOMP3
— — RS485 Yes 900-TC16NCOMV2
1-Phase HB — — Yes 900-TC16P1V2
➊ Series B option units must be used with Series B controllers. DO NOT use series B option units
with Series A controllers.
DIN Size
(in mm)
Number of
Alarms
Sensor Input
Type
Power Supply
Voltage
Control Output
Type
Comm Function
(RS-445)
Cat. No for Enhanced
900-TC32 Line
1/16th DIN
1
Thermocouple
or RTD
100…240V AC Relay On/Off Yes 900-TC32CRGTZ25
Volts On/Off (SSR) Yes 900-TC32CVGTZ25
Relay On/Off No 900-TC32RGTZ25
Volts On/Off (SSR) No 900-TC32CVGTZ25
24V AC/DC Relay On/Off Yes 900-TC32CRGTZ25
Volts On/Off (SSR) Yes 900-TC32CVGTZ25
Relay On/Off No 900-TC32RGTZ25
Volts On/Off (SSR) No 900-TC32CVGTZ25