User guide

Publication 900-UM007D-EN-E - January 2011
Parameter Functions & Definitions 5-111
Note: Each parameter is enabled when the controller power is reset.
Related Parameters
• Communications Writing (Adjustment function group, page 5-26)
Table 5.EK
Parameter Symbol Selection or Configurable Values Settings Default
Protocol Setting psel cwf, mod 900-TC or Modbus cwf
Communications Unit No. u-no 0…99 0…99 1
Communications Baud Rate bps 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, or 57.6
(kbit/s)
1.2, 2.4, 4.8, 9.6, 19.2, 38.4, or
57.6 (kbit/s)
9.6
Communications Data Length len 7, 8 (bit) 7, 8 (bit) 7
Stop Bits sbit 1, 2 1, 2 2
Communications Parity prty None, Even, Odd None, Even, Odd even
Send Data Wait Time sdwt 0…99 0…99 (ms) 20