User guide

Publication 900-UM007D-EN-E - January 2011
Parameter Functions & Definitions 5-87
Related Parameters
• Temperature Input Shift, Upper-Limit Temperature Input Shift Value,
Lower-Limit Temperature Input Shift Value (Adjustment function
group, page 5-34)
• Input Type (Initial Setting function group, page 5-50)
MV at Stop and Error Addition
Conditions of Use: The control method must be configured to 2-PID
control.
Function: This parameter allows you to configure whether or not the MV at
Stop and MV at PV Error parameters are to be displayed on the controller.
Related Parameter
• MV at Stop, MV at PV Error (Adjustment function group, page 5-41)
Auto/Manual Selection Addition
Conditions of Use: The control method must be configured to 2-PID
control.
Function: This parameter allows you to configure whether the Auto/Manual
parameter is to be displayed on the controller.
Related Parameter
• Auto/Manual Switch (Operation function group, page 5-10)
Table 5.DB
Selections Default
on: Displayed, off: Not displayed off
Table 5.DC
Configurable Range Default
on: Displayed, off: Not displayed off
mvse
amad