User guide

Publication 900-UM007D-EN-E - January 2011
5-68 Parameter Functions & Definitions
Extraction of Square Root Enable (900-TC8,
900-TC16)
Conditions of Use: An analog input must be supported.
Function: This parameter enables and disables square root extraction.
Related Parameter
• Extraction of square root low-cut point (Adjustment function group,
page 5-44)
Move to Advanced Setting Function Group
Conditions of Use: The Initial Setting/Communications Protect parameter
must be set to 0.
Function: This parameter allows you to move to the Advanced Setting
function group by entering the value −169 when the parameter is displayed
Note: Once the value (–169) is displayed on the controller you can move to
the Advanced Setting function group either by pressing the
M key or
O key or by waiting for 2 seconds to elapse.
Related Parameter
• Initial Setting/Communications Protect (Protect function group, page
5-4)
Table 5.CD
Setting Range Default
on: Enabled, off: disabled None
sqr
amov