User guide

Publication 900-UM007D-EN-E - January 2011
Parameter Functions & Definitions 5-53
Related Parameter
• Input Type (Initial Setting function group, page 5-50)
Temperature Units (° C/ ° F) Selection
Conditions of Use: The Input Type must be configured for a temperature
input (RTD, non-contact, or thermocouple).
Function: This parameter allows you to configure the temperature input units
to either °C or °F.
Related Parameter
• Input Type (Initial Setting function group, page 5-50)
Table 5.BG Decimal Point
Parameter Controller Type Configurable Range Default
Decimal Point Controllers with
Thermocouple/Resistance
Thermometer (RTD) inputs
0…1 0
Controllers with Analog Inputs 0…3 0
Table 5.BH
Configured Value Meaning Example
0 0 digits to the right of the decimal point 1234
1 1 digits to the right of the decimal point 123.4
2 2 digits to the right of the decimal point 12.34
3 3 digits to the right of the decimal point 1.234
Table 5.BI
Selections Default Units
c: °C
f: °F
c
d-u