User guide

Publication 900-UM007D-EN-E - January 2011

5-44 Parameter Functions & Definitions

Related Parameters

• Proportional Bband (Adjustment function group, page 5-35)

Extraction of Square Root Low-cut Point,

Condition of Use: The input type must be an analog input, and the

Extraction of Square Root Enable parameter must be set to ON.

Function: This parameter sets the extraction of square root low-cut point

used for the inputs. The low-cut point is used for extracting the square root for

flow rate sensors. The data after extracting the square root is shown below.

Related Parameters

• Extraction of Square Root Enable (Initial Setting function group, page

5-44)

Table 5.AZ

Configurable Range Units Default

0.0...100 % 0.0

5qrp

Argument 1 (input data)

Operation result

100% FS

Extraction of square

root low-cut point