User guide

Publication 900-UM007D-EN-E - January 2011
5-4 Parameter Functions & Definitions
Initial Setting/Communications Protection
This portion of the Protect function group restricts movement by keypad to
the Initial Setting function group, Communications Setting function group,
and Advanced Setting function group.
Setting/Configuration Change Protection
Conditions of Use: Event Input Assignment 1 and 2 must NOT be
configured to “Setting Change Enabled/Disabled”
Function: This portion of the Protect function group restricts changes to
controller setup parameters by key operation.
➋ Default
Note: The all protect indicator will light when configuration change
protection is ON.
Table 5.B — Initial Setting/Communications Protection
Configured
Value
Initial Setting
Function Group
Communications Setting
Function Group
Advanced Setting
Function Group
0
1 ➊ X
2X X X
➊ Default. Level of Protection: Able to reach, X Cannot reach.
Table 5.C — Setting/Configuration Change Protection
Configurable Range Default
on: Enabled, off: Disabled on
Table 5.D — Configuration Change Protection
Configured Value Description
OFF ➋ Setup can be changed by key operation.
ON Setup cannot be changed by key operation. (The Protect function
group can be changed.)
icpt