User guide

Publication 900-UM007D-EN-E - January 2011

Parameter Functions & Definitions 5-3

Move to Protect Function Group

Conditions of Use: The Password to Move to Protect function group

parameter must NOT be set to 0.

Function: This parameter allows you to specify a password that must be

entered to move to the Protect function group.

• The Operation/Adjustment Protect parameter will be displayed if the

correct password is entered.

Related Parameters

• Password to Move to Protect function group (Protect function group,

page 5-5).

Operation/Adjustment Protection

Function: These parameters specify the range of parameters to be protected.

Table 5.A shows the relationship between the configured/set values and the

range of protection.

Note: Parameter items are not protected when the configured/set value is 0.

Table 5.A

Function Group

Configured/Set Value

0 ➊ 123

Operation

Function Group

PV/SP

Others X X

Adjustment Function Group X X X

➊ Default Level of Protection: Can be displayed and changed. Can be displayed.

X Cannot be displayed and moving to other function groups is NOT possible.

pmov

oapt