User guide

Publication 900-UM007D-EN-E - January 2011
Parameter Adjustments & Application Considerations 4-73
EXAMPLE
Using a Simple Program
The program will be started by changing the configuration of the Program
Start parameter. The following shows an example using a simple program with
the program pattern configured to STOP.
Figure 4.163
STRT STRT
STRT
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10)
RSET
RSET
RUN RUN
STOP
PV
Set point
Wait band
Soak time Soak timeSoak time
END display
END output
RUN/STOP
status
Program
start