User guide

Publication 900-UM007D-EN-E - January 2011
4-28 Parameter Adjustments & Application Considerations
Figure 4.42
2. Select Set Point Upper-Limit parameter by using the M key.
Figure 4.43
3. Press the U or D key to set the value to 1000.
EXAMPLE
Operation Procedure: Configuring the Set Point Lower-Limit
Configure the Set Point Lower-Limit Value to –100.
1. Select Set Point Lower-Limit parameter in the Initial Setting function
group by using the
M key.
Figure 4.44
2. Press the U or D key to set the value to –100.
Figure 4.45
Note: The newly configured value or parameter is loaded into the controller
memory if you do NOT operate any key on the front panel for at least
2 seconds or by pressing the or
M key.
in-t
5
Input typ
e
C
sl-h
1300
Set point upper-
limit
C
sl-h
1000
C
sl-l
-200
Set point lower
limit
C
sl-l
-100