User guide

Publication 900-UM007D-EN-E - January 2011
Configuration & Basic Operation 3-59
HS Alarm Settings
1. Press the
O key for at least 1 second to move from the Advanced
Setting function group to the Initial Setting function group and then to
the Operation function group.
Figure 3.120
2. Press the O key for less than 1 second to move from the Operation
function group to the Adjustment function group.
Figure 3.121
3. Select the Leakage Current 1 Monitor parameter by pressing the M key.
Check the current value. Next, set the HS Alarm 1 parameter.
Figure 3.122
4. Select the HS Alarm 1 parameter by pressing the M key. Refer to How to
Calculate Heater Current Detection Values when setting the values.
Figure 3.123
5. For this example, set 2.5. To return to the Operation function group,
press the
O key for less than 1 second.
Figure 3.124
C
25
100
PV/SP
l.
a
dj
Ad
j
ustment
f
u
n
c
tion
g
roup displa
y
lcr1
0.0
Leakage current
1 monitor
hs1
50.0
HS alarm 1
hs1
2.5