Manual

4-4 Supporting Functions
865-UM001A-EN-P – July 2009
Table 4.4 – Disturbance Recorder Parameters
Parameter Value Unit Description Note
Mode
Saturated
Overflow
Behaviour in memory full
situation:
No more recordings are accepted
The oldest recorder will be
overwritten
Set
SR
32/cycle
16/cycle
8/cycle
1/10ms
1/20ms
1/200ms
1/1s
1/5s
1/10s
1/15s
1/30s
1/1min
Sample rate
Waveform
Waveform
Waveform
One cycle value 
One cycle value 
Average
Average
Average
Average
Average
Average
Average
Set
Time s Recording length Set
PreTrig % Amount of recording data before
the trig moment
Set
MaxLen s Maximum time setting.
This value depends on sample
rate, number and type of the
selected channels and the
configured recording length.
Status
–
Run
Trig
FULL
Status of recording
Not active
Waiting a triggering
Recording
Memory is full in saturated mode
ManTrig
–
Trig
Manual triggering Set
ReadyRec n/m n = Available recordings
m = maximum number of
recordings
The value of 'm' depends on
sample rate, number and type of
the selected channels and the
configured recording length.
Set = An editable parameter (password needed)
 This is the fundamental frequency rms value of one cycle updated every 10 ms.
 This is the fundamental frequency rms value of one cycle updated every 20 ms.