Software

5–18 Using ODS for Project Management
Publication MCD-5.1 -August 1999
Use this procedure to back up a project to floppy disk:
1. Press [
F2] and pull down the F2-Project menu.
2. Select the
Backup option.
ODS displays the message
BACKUP project and the directory of
projects.
3. Select the project to be backed up and press [ENTER]. Press [ESC]
to cancel.
ODS asks you which floppy-disk drive to send project files to:
4. Select one of the drives according to the computer’s
configuration, and press [
ENTER]. Press [ESC] to cancel.
The screen goes blank briefly and ODS activates the
ODS-supplied disk backup utility.
Important: The target drive is the floppy-disk drive to
which the project is being backed up. All files
on the floppy disk are deleted.