Owner's manual

Allen-Bradley 7300 Series CNC
Tape Compatibility
Appendix D
D-3
Table D.B lists all standard 7300 M-codes that the control can execute in
7300 mode.
Important: In order to provide the same functionality as the 7300 PAL,
the system installer has to write a specific application in PAL when
interfacing with the control.
Refer to the System 7320 Programming Manual for details on these
M-codes a nd their operation.
Table D.B
M-code
M-code: Function:
M00 Programstop
M01 Optional programstop
M02 Endofprogram
M03 Spindle on,CW
M04 Spindle on,CCW
M05 Spindle off
M06 Tool transfer
M07 Mistcoolanton
M08 Flood coolanton
M09 Coolantoff
M19 Spindle orient
M30 Endofprogram,rewind
M48 Feedrate override,andspindleoverride,normal
M49 Feedrate override,andspindleoverride,bypassto100%
M-code Compatibility
Considerations