Owner's manual

Error and System Messages
Appendix B
B-25
Message Description
MAXIMUMBLOCK NUMBER REACHED A renumberoperationwasperformedtorenumberblock sequence numbers(N-words),and the
controlhas exceededa block numberofN99999. Eitherthe programistoolargetorenumber,
ortheparameters forthefirstsequencenumber,orthesequencenumberincrement,aretoo
large. Whenthiserroroccurs,the renumberoperationstops renumberingatthe lastblock
within the legal range ofN-words.
MAXIM UMNUMBER OF AXESEXCEEDED IftheCOCOMbreakoutis true,amaximumof4 concurrentinterpolated axes canbe used.
MAXIM UMNUMBER OF PROGRAMS The RAMdiskdirectoryfor partprogram storage isfull. Youcan storeonly328 fileson the
systemeven when memoryis available forpartprogramstorage.
MAXIMUMRETRACE COUNT REACHED The limit(definedin AMP)fortheamountofretrace blocks allowed wasreached. No further
retracing willbe allowed.
MAXIM UMREVERSE PLANES EXCEEDED The order thatthe axesarenamed in AMP is important. If,forexample,axisone’snameis
assignedas X andaxisthree’sname is assigned asZ,a reverseplane isdefined ifthe G18
planeis assigned inAMP astheZX plane. The G18 planedefinesa plane consistingofaxis3
followed by axis1,making itareverse plane(axis 1followed byaxis3 wouldbe a normal plane
since1 isconfiguredbefore 3fromthestandpointof ODS). This also pertainsto parallel axes.
Amaximum of fourreverse planesisallowed. Ifyoursystem exceedsthis numberofreverse
planes,youmustre-configureyourAMP.
MAXIM UMRPM LIMI T AUXILIARY SPINDLE 2 A requestwasmadeforthe auxspindle2 speedtoexceedtheAMPed maximumvalue.
Reducetheprogrammedaux spindle 2 speed,orusethespindlespeed overrideswitch to
reduce theRPM.
MAXIM UMRPM LIMI T AUXILIARY SPINDLE 3 A requestwasmadeforthe auxspindle3 speedtoexceedtheAMPed maximumvalue.
Reducetheprogrammedaux spindle 3 speed,orusethespindlespeed overrideswitch to
reduce theRPM.
MAXIM UMRPM LIMI T FIRST SPINDLE Arequestwasmadefor the spindle 1speed to exceed the AMPed maximumvalue. Reducethe
programmed spindle1 speed,or use the spindle speedoverride switchtoreducetheRPM.
MAXIM UMRPM LIMI T PRIMARY SPI NDLE Arequestwasmadefor the primary spindle speedtoexceed theAMPed maximumvalue.
Reducetheprogrammedprimaryspindlespeed,oruse thespindle speed overrideswitch to
reduce theRPM.
MAXIM UMRPM LIMI T SECOND SPINDLE Arequestwas made forthespindle2 speedtoexceed the AMPedmaximumvalue. Reduce the
programmed spindle2 speed,or use the spindle speedoverride switchtoreducetheRPM.
MAXIM UMRPM LIMI T THIRD SPINDLE A requestwasmadeforthe spindle 3 speed to exceedtheAMPed maximumvalue. Reducethe
programmed spindle3 speed,or use the spindle speedoverride switchtoreducetheRPM.
MESSAGE PENDING,PRESS AKEY TO DISPLAY Th e 9/Seriesscreensaver is engagedand a systemerror message,PAL errormessage,E-Stop
condition,orPAL display pagehas beenactivated. Press anykey on the keyboard to disable
the screen saverandviewtheerror orPALdisplaypage.
MDIINPUT COMMANDTOO LONG The MDIinputcommand string exceedsthemaximumlength allowed.
MDINOT ALLOWED DURING INTERRUPT MACRO An attemptwasmadetohaltthe execution ofainterruptprogramandexecutea MDIcommand.
MDI commandscannotbeexecuted during the execution ofainterruptprogram.
MDINOT ALLOWED DURING POCKETMILLING An MDIcommand cannotbe programmed while aG88 orG89 pocket milling cycle is executing.
MDINOT ALLOWED DURING RETRACE You cannotuse MDIwhilea retrace operationis inprogress.
MEASUREMENT POINT OVERFLOW The user triedtoenter morepointsinto onlineAMP foraxiscalibrationthanarepermitted.
MEMORYCRASH -REFORMAT A majorerrorhas occurred within thesystemRAMmemory. Allp artprogramsstored inmemory
willhavetobe bedeletedbyperforminga reformatoperation. Thiswillnot remove the current
versions ofAMP orPAL fromthe system.
MEMORYFULL Thereis no more RAMmemory space for partprogramstorage. Ifyou are intheprocess of
editing apartprogram,your changes cannotbesaved.
MIDSTART NOT ALLOWEDFROM TAPE You cannotperforma mid-programstarton aprogram thatisstored ontape. The programmust
first be transferred to RAM memory.