Owner's manual

Error and System Messages
Appendix B
B-16
Message Description
GRAPHICS ACTIVE IN ANOTHER PROCESS Graphics canonly be active in one processata time. You mustturn graphicsoffinone process
before youcanactivatetheminanotherprocess.
H
HARDSTOP ACTIVATION ERROR An attemptwasmadeto(G24)hardstop anaxis while a differentaxis wasalready holding
againstahardstop.
HARD STOP AND/OR ADAPTIVE DAT ACONFLICT Anattemptwasmadetocreate a transfer line partprogram fromthe quickviewscreen entering
data for both hard stop (G24)and adaptive depth features (G26). You canselectonly oneof
these features.
HARDSTOP AXISNOT ALLOWED IN INTERRUPT Anaxiswhichis stillhard-stopped due to a previous G24blockmaynotbe moved byany block
insidean interruptmacro program.
HARDSTOP DETECTION ERROR Ahardstop(G24)wasdetectedoutsideofthe programmed hardstop region. Ora hard stop
wasnotdetected beforethe hardstop axisreachedits endpoint.
HARDSTOP DIRECTION ERROR The axiscurrentlyholdingagainstahardstop(G24)wasprogrammed with amovefurtherinto
the hardstop. Youmustprogramthemoveawayfromthehardstopin the direction opposite to
the directionused to place the axisatthe hardstop.
HARD STOP EXCESS ERROR The hard stop axis(G24) was moving too fastwhen itencountered the hard stop. Youmust
reduce theaxisfeedratebefore contacting the hard stop.
HARDWARE ERROR#1 The 68030 (68000on 9/240 only) mainprocessorreceived an interrupt ofunknown origin on
level6. ConsultAllen-Bradley customersupportservices.
HARDWARE ERROR#2 The 68030 (68000on 9/240 only) mainprocessorhasdetecteda buserror. Consult
Allen-Bradley customersupportservices.
HARDWARE ERROR#3 The 68030 (68000on 9/240 only) mainprocessorhasdetecteda spurious interrupt. Consult
Allen-Bradley customersupportservices.
HARDWARE ERROR#4 The 68030(68000on 9/240 only)mainprocessorhas detectedan illegaladdress. Consult
Allen-Bradley customersupportservices.
HARDWARE ERROR#5 The PAL programresiding in RAMmemory has failed a checksum test. Attempttodownload
yourPAL programto the controlagain. Ifthe errorremains,consultAllen-Bradleycustomer
support services.
HARDWARE ERROR#6 The 68030 (68000on 9/240 only) mainprocessorhasdetecteda privilege violation. Consult
Allen-Bradley customersupportservices.
HARDWARE ERROR#7 The AMP datain Backup memoryhas faileda checksum test. Attemptto download yourAMP
programtothecontrol again andagain trytostore it in Backup memory. Iftheerrorremains,
consultAllen-Bradleycustomersupportservices.
HARDWARE ERROR#10 The servo processorRAMdiagnostictest has failed. ConsultAllen-Bradley customersupport
services.
HARDWARE ERROR#12 The servo communicationstiming diagnostic testbetweenthemain processorand the servo
processorhas failed. ConsultAllen-Bradley customer supportservices.
HARDWARE ERROR#13 The main processorwasnotreadyin timeto senddatatotheservoprocessor. Consult
Allen-Bradley customersupportservices.
HARDWARE ERROR#14 The servo processorsentaninvaliderror code to the main processor. ConsultAllen-Bradley
customersupportservices.
HARDWARE ERROR#15 The servo communicationsdataecho diagnostictestbetweenthe main processorand the servo
processorhas failed. ConsultAllen-Bradley customer supportservices.
HARDWARE OVER TRAVEL (+) Theindicated axishasreacheda travellimitin the positivedirection.
HARDWARE OVER TRAVEL (-) The indicated axis hasreacheda travellimitin thenegativedirection.
HIPERFACECOMMUNICATION ERROR Aserial communicationserror(e.g.,CHECKSUM,TIMEOUT)was detectedwithin the SINCOS
deviceduringpower-- up. IfthiserroroccursatPTO,check your feedbackdevicetomakesureit
isnotdisconnected.