Owner's manual

Chapter 30
Using a 9/Series Dual--processing System
3
0
-
3
1
The Dual Axis feature allows the part programmer to simultaneously
control multiple axes while programming c ommands for only one. It
differs from the split axis feature of the control i n that the split axis feature
is used to control a single axis
positioned by two servo motors.
The dual axis feature is especially useful for gantry mills with dual cutting
heads a nd other machines running with parallel cutting tools. Figure 19.1
shows a typical configuration for dual axes.
Figure 30.10
Dual Axis Configuration
Axis 1
Lead screw
Servo
motor
Axis 2
Lead screw
Servo
motor
Encoder
Dual Axes - two completely separate
axes responding to the same
programming commands.
Encoder
The 9/Series c ontrol supports two groups of dual axes. This is the total
number of groups allowed on the system for both processes (i.e. two
groups in one process or one group in each process).
Dual axis operation on dual processing systems is virtually identical to
dual axis operation on single processing systems (see chapter 20 for
details). The difference occurs on dual processing system when one or
more of the a xes in the dual group is configured as a shared axis between
processes.
30.7
DualAxes on a
Dual-processing System