Owner's manual

Chapter
30
3
0
-
1
Using a 9/Series Dual-processing
System
Read this chapter to learn general information related to programming and
operating a dual-processing system. Major topics in this chapter cover:
Topic: On page:
Definitionofa dual-processing system 30-1
Operating adual-processing system 30-2
Synchronizingmultiplepartprograms 30-7
Spindle controlfordual-processing 30-12
Usinginterference checking 30-12
A dual-processing system is basically two machine tools in one. One
9/Series control is capable of executing two separate part programs,
controlling separate machining axes. Offsets, tool management, and axis
feedrates a re independent for each program. Each of these two
independent systems is called a process. The 9/Series control is capable of
running two processes simultaneously.
You can configure the 9/Series dual-processing mill to run on a wide
variety of machines. For dual-processing to function correctly, your
system installer must make certain AMP and PAL configuration
considerations. Refer to the 9/Series AMP and 9/Series PAL reference
manuals or your system installer’s documentation for details.
This chapter focuses on a 7-axis horizontal mill. Many other applications,
like a completely separate twin-milling machine are possible a nd easily
configured by your system installer. Operation of these other applications
must be interpreted from the 5-axis gantry application presented in this
manual.
30.0
Chapter Overview
30.1
Defining of a Dual-
processing System