Owner's manual

Paramacros
Chapter 28
28-24
#5021 to 5032
Coordinates of Commanded Posit ion
These parameters are read-only. They correspond to the current
coordinates of the cutting tool. These are the coordinates in t he work
coordinate system.
5021 Axis 1coordinate position 5027 Axis7 coordinateposition
5022 Axis 2coordinate position 5028 Axis8 coordinateposition
5023 Axis 3coordinate position 5029 Axis9 coordinateposition
5024 Axis 4coordinate position 5030 Axis10 coordinateposition
5025 Axis 5coordinate position 5031 Axis11 coordinateposition
5026 Axis 6coordinate position 5032 Axis12 coordinateposition
The system i nstaller determines in AMP the name (or word) that is used to
define the axis.
#5041 to 5052
Machine Coordinate Position
These parameters are read-only. They correspond to the coordinates of the
cutting tool in the machine (absolute) coordinate system.
5041 Axis 1coordinate position 5047 Axis7 coordinateposition
5042 Axis 2coordinate position 5048 Axis8 coordinateposition
5043 Axis 3coordinate position 5049 Axis9 coordinateposition
5044 Axis 4coordinate position 5050 Axis10 coordinateposition
5045 Axis 5coordinate position 5051 Axis11 coordinateposition
5046 Axis 6coordinate position 5052 Axis12 coordinateposition
The system i nstaller determines in AMP the name (or word) that is used to
define the axis.
Position data for the absolute position of an adaptive depth probe is
invalid.