Owner's manual

Skip, Gauge, and Probing Cycles
Chapter 27
27-16
2. Press t he {PROGRAM PARAM} softkey.
PTOM
SI/OEM
AMP DEVICE
SETUP
MON-
TOR
TIME
PARTS
(softkey level 2)
PRGRAM
PARAM
3. Press t he {PROBE PARAM} softkey to display the probing cycle
parameter table.
ZONE
LIMITS
F1-F9 MILCYC
PARAM PARAM
(softkey level 3)
PROBE
Figure 27.6
Probing Par ameters Screen
INCH/
METRIC
UPDATE
& EXIT
QUITADD TO
VALUE
PROBING PARAMETERS
APPROACH DISTANCE R 0.000 [ MM]
TOLERANCE BAND D 0.000 [ MM]
APPROACH FEEDRATE E 0.000 [MMPM]
PROBE FEEDRATE F 0.000 [MMPM]
PROBE LENGTH 0.000 [ MM]
PROBE RADIUS 0.000 [ MM]
REPLCE
VALUE
4. Use the up, or down cursor keys t o move the block cursor to the
probing parameter to be changed. The selected parameter will be
shown in reverse video.