Owner's manual

Chapter
2
6
26-1
Milling Fixed Cycles
This chapter covers the G-word data blocks in the milling fixed-cycle
group. The operations of the milling fixed cycles are e xplained in these
sections:
Information on: On page:
Milling Fixed Cycles 26-2
Positioningand Hole Machining Axes 26-4
Parameters 26-7
Milling Fixed Cycle Operations 26-8
Altering Milling Fixed Cycle Operating Para meters 26-38
Examples ofMillingCycles 26-40
For this chapter, as well as this manual, make the following assumptions:
X a nd Y axes are the positioning axes (G17 plane).
Z axis is the hole machining axis for drilling, boring, and tapping
applications.
26.0
Chapter Overview