Owner's manual

Basic Control Operation
Chapter 2
2
-
3
1
Parameter Name: Function becomes accessible when parameter name isin reverse video:
23) SCALING WhenSCALINGis notin reverse video,theoperatorstill hasaccesstothe{SCALNG} softkey;however
valueson the screen may notbemodified.
24) CHANGE
DIRECTORY
Allows access to the protectable directory forfile edit,directexecution selection,andencrypted output.
25)AUXCOMM Allows access to the{AUX COMM} softkey thatsets Data Highway CommunicationModuleParameters.
26) SEARCH MONITOR Allows access to the{SEARCH MONITOR} page that allowssearchingand monitoring of thecontrol’s
PAL program. Thisparameteralsoprotectshotkey accessto the search monitorpage.
27) PASS THRU ENABLE Allows access to the {PT ENABLE} softkeythatenablesremoteI/O pass thruofAMP,PAL,andother
ODSfeatures. The {PT ENABLE} softkey isonlyavailablewhen AMPisconfigured to disallow block
transfers andthesystemcontains remoteI/O hardwarethathasbeen enabled throughPAL.
When you power-up, only functions that are not protectable and functions
that are a ssigned to access level 8 are available (provided that the active
level when power was turned off was not assigned the POWER UP
LEVEL feature). To access the functions that are assigned to a specific
access level, you must enter the password that corresponds to that access
level. To enter a password, follow these steps:
1. Press t he
{PASSWORD} softkey.
(softkey level 1)
PRGRAM
MANAGE
OFFSET MACRO
PARAM
PRGRAM
CHECK
SYSTEM
SUPORT
FRONT
PANEL
ERROR
MESAGE
PASS-
WORD
SWITCH
LANG
2.7.3
Entering Passwords