Owner's manual

Basic Control Operation
Chapter 2
2
-
3
0
Table 2.E
Password Protectable Functions
Parameter Name: Function becomesaccessible when parametername is in reverse video:
8) OFFSETS • {WORK CO-ORD} — Display and alter the presetwork coordinatesystemzero locations and the
fixture offsetvalue.
• {TOOL WEAR} Display andalterthe tool wearamounttables forthedifferenttools.
• {TOOL GEOMET} — Displayand alterthetoolgeometrytables.
• {ACTIVE OFFSET} — Change the currently activeoffsetnumberwithoutrequiring the
programming ofadifferentoffsetnumber.
• {TOOL MANAGE} — Alter the toollife indicatorsand othermachine specifictoolfunctions.
• {RANDOM TOOL} — Allowtheuse oftherandomtooltables used to keeptrack ofdifferenttools in
different toolpocket(see chapter 20).
• {COORD ROTATE} — Rotate all ofthework coordinatesystemsfromthe ma chine coordinate
system.
• {BACKUP OFFSET} — Makea copyofthecurrenttooloffsetdata.
9)TOOLWEAR {TOOL WEAR} — Display andalterthe tool wear amounttable forthedifferenttools.
10)TOOLGEOMETRY {TOOL GEOMET} — Displayand alterthetoolgeometrytable.
11)ACTIVE OFFSET {ACTIVE OFFSET} — Change the currently activeoffsetnumberwithoutrequiring the programming
ofa differentoffsetnumber.
12) BACKUP OFFSET {BACKUP OFFSET} — Makea copy ofthe currenttool offsetdata.
13) QUICKCHECK {QUICK CHECK} — Use the syntaxand formatcheckeror the {QUICK CHECK} withgraphics
function.
14) SYSTEM SUPORT • {PRGRAM PARAM} — Displayand changethetables forprogrammablezones1 and2,the
single-digitfeedrates,andthefixed-cycle operating parameters.
• {AMP} — Change anyoftheonlineAMPfeatures.
• {DEVICE SETUP} — Displayand changeany ofthecommunicationparameters fortheperipheral
devices.
• {MONI-TOR} — DisplaythecurrentI/O configurationsand the axismonitorfor following error,
distance to marker,etc. Systemsuportdoes notprotecthotkeyaccesstothesearchmonitorpage.
15) PRGRAM
PARAMETERS
{PRGRAM PARAM} — Displayand change thetables forprogrammablezones1 and2,thesingle-digit
feedrates,andthefixed-cycleoperating parameters.
16)ONLINE AMP {AMP} — Displayand changetheonlineadjustable machine parameters.
17) PARAMACRO
PARAM
{MACRO PARAM} — Displayorchange any ofthe valuesintheparamacro tableswithoutusing
programming commands.
18) ACCESS CONTROL {ACCESS CONTRL} — Assign differentfunctionstodifferentaccesslevels,change the current
password,orviewthefunctionsassigned tothedifferentaccesslevels.
19) SWITCH LANGUAGE {SWITCH LANG.} — Change the currentdisplays fromonelanguage to another.
20) POWER-UP LEVEL When POWER-UP LEVEL is shown in reverse video,itindicatesthatifpower is turnedoffwhen thislevel
isactive,thislevelautomaticallybecomesactive whenpoweristurned backon. Ifthisisnotinreverse
video,itindicatesthatthecontrol defaults to level8 access control atnextpower-up.
21)TIME PARTS • {SET TIME} — Change orresettime parameters
• {SET DATE} — Change orresetdataparameters
WhenTIMEPARTS is notinreverse video,theoperator can onlyperformthe followingfunctionson the
time and partsscreen: RUNTIME,CYCLETIME,andLOT SIZE.
22) SI/OEMMESSAGE • {ENTER MESSAGE} — Enter a newmessagetobe displayed onthecontrol’s power-upscreen.
• {STORE BACKUP} — Store anentered message forthepower-up screen to backupmemory.