Owner's manual

Basic Control Operation
Chapter 2
2
-
2
6
This section describes setting or changing the functions assigned to a
particular access level, and changing the password used to activate that
access level.
Important: Functions or passwords can be assigned to another access
level only if:
If you have a higher access level than the access level you are
attempting to change, this means that if your password is assigned to
access l evel 6, you can only change the functions or passwords for
access levels 7 and 8. Functions, or a password, cannot be assigned to
access level 6 with a level 6 password.
Functions that are not available t o the current user cannot be assigned to
other levels. If a user with access level 6 is changing a lower access
level functions, access level 6 must have access to any functions that are
changed. For example, i f you are an access level 6 user, you do not
have access to
{SYSTEM SUPORT}, you cannot assign or remove
{SYSTEM SUPORT} to access level 7.
The current user must have access t o the {ACCESS CONTROL} function.
To change the functions or password of a lower user number, follow these
steps:
1. Press t he
{PASSWORD} softkey.
(softkey level 1)
PRGRAM
MANAGE
OFFSET MACRO
PARAM
PRGRAM
CHECK
SYSTEM
SUPORT
FRONT
PANEL
ERROR
MESAGE
PASS-
WORD
SWITCH
LANG
2.7.1
AssigningAccess Levels
and Passwords