Owner's manual

Basic Control Operation

Chapter 2

2. Select one of these softkey options:

block retrace

jog retract

cycle start

cycle stop

To Perform a: Press:

Cycle Start the softkeythatcorresponds to the desired feature. Detailson these

featuresaredescribed inchapter 7.

Cycle Stop the softkeythatcorresponds to the desired feature. Detailson these

featuresaredescribed inchapter 7.

Block Retrace the {BLOCK RETRCE}softkey. The controlautomatically

retracesthe previouslyexecutedblockeach timeyou press. The tool

returnstothe startpointofBlock Retrace whenyou press the

{CYCLE START} softkey. Detailson Block Retrace can be found

inchapter7.

Jog Retract the {JOG RETRCT} softkey. T his calls upthejog retractscreen.

Select: theaxis,the type ofjog,the speedmultiplyvalue(see

chapter 4),ortheHPGnumber(ifHPGhas beenselected asthe

type ofjog). Usetheup anddowncursorkeysto selectthe function,

and the leftandrightcursorkeystoalter the value assigned to that

function.

3. If you selected JOG RETRACT, press t he {JOG AXES +} or

{JOG AXES -} softkeys to select the direction to jog the axis. Press

the exit {

• } softkey when you complete the jog retract. The cutting

tool automatically retraces the j og moves you made when you pressed

the

{CYCLE START}. See chapter 7.

(softkey level 4)

SET

ZERO

JOG

AXES +

JOG

AXES-