Owner's manual

Basic Control Operation

Chapter 2

Jog Screen

We assume that you have performed the steps to display the Software

Front Panel screen. Make sure that the function selected on the Software

Front Panel screen is not the Mirror Image or the Axis Inhibit features.

1. Press t he

{JOG AXIS} softkey.

(softkey level 2)

JOG

AXIS

PRGRAM

EXEC

This screen appears:

SET

ZERO

JOG

AXIS +

JOG

AXIS -

PROGRAM [mm] F 0.000 MMPM

Z 0.000 S 0.0

R X 0.000 T 0

C 359.99 FILENAME

SUB NAME

MEMORY MAN STOP

AXIS SELECT: X

JOG SELECT: CONTINUOUS

SPEED/MULTIPLY LOW

HPG NUMBER 0

E-STOP

2. Select the axis, jog type, speed multiply value (see chapter 4), and

HPG number (if HPG has been selected as the type of jog) by using

the up a nd down cursor keys, and the left and right cursor keys to

alter the value assigned to that function.

3. If the j og type is not HPG, then press the softkey that corresponds to

the direction on the selected axis to jog (if HPG is the jog type then

the direction of HPG rotation determines the direction to jog).

4. If you want to shift the current work coordinate system to force the

current tool position t o be the zero point of the work coordinate

system, press the

{SET ZERO} softkey. The {SET ZERO} softkey does

not function when the control is in handwheel mode.