Owner's manual

Communications
Chapter 9
9-4
DEVICE (setting type of peripheral)
Select your peripheral device immediately after selecting your serial port.
The devices with default communication parameters stored in the control
are listed in Table 9.A. If the device that you are using is not listed, select
either USER PUNCH, USER PRINTER, or USER READER.
Important: You cannot select the same device for both peripheral ports.
Once you select a device for PORT A, that device is no longer an option
available for PORT B and vice-versa.
Table 9.A
Available Devices For Communication
Device Device Type
Allen-Bradley 1770-SB Cartridge
Ricoh PT R240R
Facit N4000
Reader
Decitek AB8000-XPDR
DSI SP75
Facit 4070 Punch
Facit N4000
Epson LX-810 (USA) Printer
Epson SP-500 (JAPAN)
UserPunch
UserReader UserDefined
UserPrinter
Teach Pendant
PAL-RS232 Comm
ODS ODSTerminal
Generic Level_2 Computerusingonly level 2 protocol
Greco Minifile IntelligentStorage
Intelligent Device Personal Computerusing
Communication Software
For more information on some of these peripheral devices and their
function, refer to your integration manual.