Owner's manual

Displays and Graphics
Chapter 8
8-36
3. To change the size of the window, use the {INCR WINDOW} or
{DECR WINDOW} softkeys. To change the window size at a faster
rate, press and hold the [SHIFT] key while pressing the {INCR
WINDOW} or {DECR WINDOW} softkeys.
Each time you press: The ZoomWindow :
{INCR WINDOW} increases in size.
{DECRWINDOW} decreases insize.
4. Once the size and the location of the window are correct, press the
{ZOOM} softkey to return to the regular QuickCheck graphics
screen.
(softkey level 4)
INCR
WINDOW
DECR
WINDOW
ZOOM
ABORT
ZOOM
The graphics screen is automatically cleared of the previously plotted tool
paths. The control begins plotting new tool paths from its current location
in the program using the new window size.
Ifyou press {ZOOM BACK}: It:
one,two orthree times
reversesthezoomin increments,goingback to your
mostrecentzoom(not theoriginal).
a fourth time returnsthegraphics screen to the defaultsize.
When you press the {ZOOM BACK} softkey, t he control clears the
graphics screen of any previously plotted tool paths. The control resumes
plotting new tool paths from its current location in the program using the
current window size.