Owner's manual

Displays and Graphics
Chapter 8
8-3
3. To return to softkey level 1, press the [DISP SELECT] key a gain.
The most recently selected data position screen will remain in effect
for softkey level 1 until either power is turned off or a different
position display screen is selected. The default screen selected at
power up is the regular size program display.
The following figures show the axis position data display that will result
when the c orresponding softkey is pressed.
(1) {PRGRAM}
Axis position in the current work coordinate system displayed in normal
size characters.
Figure 8.1
Result Afte r Pressing {PRGRAM} Softkey
PRGRAM ABS TARGET DTGAXIS
SELECT
PROGRAM[ MM ] F 0.000 MMPM
X -7483.647 S 00
Z -7483.647 T 0
U -7483.647 (ACTIVE PROGRAM NAME)
MEMORY MAN STOP
E-STOP