Owner's manual

Running a Program
Chapter 7
7-9
It is sometimes necessary to deactivate a part program that has been
selected for automatic execution. This is necessary when selecting a
different part program for automatic execution. To do this follow these
steps:
1. Press t he {PRGRAM MANAGE} softkey. The control displays the
program directory screen as shown in Figure 7.2.
(softkey level 1)
PRGRAM
MANAGE
OFFSET MACRO
PARAM
QUICK
CHECK
SYSTEM
SUPORT
FRONT
PANEL
ERROR
MESAGE
PASS-
WORD
SWITCH
LANG
Important: If a program is active, an “A”appears to the right of the
program name. If a program is being edited, an “E”appears to the right of
the program name. Figure 7.2 shows program TEST as active and being
edited.
2. Press t he {ACTIVE PRGRAM} softkey. The control displays the
first few blocks of the currently active program.
REFORM
MEMORY
ACTIVE
PRGRAM
EDIT
PRGRAM
RESTRT
PRGRAM
DISPLY
PRGRAM
COPY
PRGRAM
VERFY
PRGRAM
PRGRAM
COMENT
DELETE
PRGRAM
RENAME
PRGRAM
INPUT
DEVICE
(softkey level 2)
3. If the program selected is not the desired active program, press the
{DEC-ACT PRGRAM} softkey. The control deactivates the part
program and returns to the directory screen.
(softkey level 3)
DE-ACT
PRGRAM
SEARCH MID ST
PRGRAM
T PATH
GRAPH
SEQ
STOP
TIME
PARTS
7.4
Deselecting a Part Program