Owner's manual

839E Solid-State Flow Sensors User Manual

Pub #10000004735 Ver 03, May 2012 19

Programming with personal computer and ReadWin 2000

The 839E can also be configured via personal computer and ReadWin software. An

additional configuration kit with a conversion cable (Part number 836E-NSR) is required to

interface the USB port of the PC to the programming port of the flow switch, as shown

below.

Figure 14 Programming with PC

➀ Personal computer with ReadWin configuration software

➁ Configuration kit (836E-NSR)

➂ Bulletin 839E with programming port

Figure 15 Sensor configuration with ReadWin

USB