User guide

Product Identification

2 Product Identification

Fig. 1: Explanation of the nameplate - see table below

Notes:

• Specifications and ratings may differ from those shown in Figure 1, depending on particular

model. Refer to product nameplate or catalog for actual ratings and specifications.

• The series number indicates the version of the switch. A change in the series letter does not

have any effect on the compatibility (see also Section 6 — Troubleshooting).

• The MWP (maximum working pressure) is specified on the nameplate. This value refers to

a reference temperature of +20 °C (68 °F) and may be applied to the device for an

unlimited time.

• The test pressure (Over Pressure Limit [OPL]) corresponds to 1.5 times the MWP and may

be applied only for a limited time before causing damage to the switch.

1 Catalog number 6 Max. working

pressure

11 Wiring diagram

2 Series letter 7 Wetted part materials 12 Approvals

3 Serial number 8 Output

4 Enclosure rating /

Ingress protection

9 Current consumption

5 Operating pressure 10 Operating voltage

PNP / 4…20mA

836E-DC1CC1D4

36E-DC1CC1D4