User Manual Manual

Functions 3-6
Publication 825-UM001B-EN-P January 2001
Figure3.3 Entering a Data Value
Note: Hold down the Select button to change the values more quickly.
Table 3.D Display Example of Set Values Menu
Note:For a complete list of parameters, refer to Chapter5.
LCD Range Description
— Mode: setting parameters
0.5…2 000 Rated motor current in A
No/Yes Primary current transformer in use
1…2 000 Primary current transformer ratio
2.5…12
Locked rotor current as
___ 
e
1…600
Maximum permitted time for the rotor to be stalled
from cold
Values
Recorded
Actual
Set
Select Settings
Enter
Change
35 AMP
SET VALUES
FULL LOAD CURR
20 A
PRIMARY C.T.
NO
PRIMARY C.T. RATIO
1
LOCKED ROT CURR
6 x Ie
LOCKED ROT TIME
10 sec