User Manual User Manual

Publication 825-UM002A-EN-P - December 2000
A-37
Instance Attributes
Bit definitions given on page A-40.
Available with SMM version 3.11 (or higher) / 825-MDN version 6.001 (or higher) product combination.
Available with SMM version 2.xx ( and lower).
Attribute
ID
Access
Rule
Name (param. #) Data
Ty pe
Min/Max Units Default Description
1 Get numAttr USINT Number of Attributes supported
2 Get Attributes Array
USINT
List of attributes supported by the
Overload
3
Set/Get le________ (#21) UDINT 30200,000 10 mA 2000 FLC Setting Value
3
Set/Get le________ (#21) UINT 5063,000 10 mA 2000 FLC Setting Value
165 Set/Get t_block_ (#23) UINT 1600 seconds 10 Max Stall Time
5 Get lmotor__ (#1)) INT 01200 % FLC 0 Average Motor Current
6 Get Asymetry (#7) USINT 0100 % 0 % Asymmetry
7 Get Th.Util_ (#2) USINT 0100 % 0 % Thermal Utilization
8 Get lmot__L1 (#3) INT 01200 % FLC 0 I phase L1
9 Get lmot__L2 (#4) INT 01200 % FLC 0 I phase L2
10 Get lmot__L3 (#5) INT 01200 % FLC 0 I phase L3
11 Get learth_S (#9) UINT 055000 .005 Amps 0 Earth Core
102 Get Time_to_ (#6) UINT 19999 seconds 9999 Time to Trip/Reset
103 Get Iearth_H (#8) USINT 0100 % 0 Earth-fault current (Holmgreen)
104
Get iAUSL___ (#18) WORD 00xffff bits 0 Actual Trip Bit String (Bit Pattern)
105
Get iVORW___ (#19) WORD 00xffff bits 0 Actual Warning Bit String (Bit Pattern)
106 Get/Set Ibl/Ie__ (#22) USINT 25120 times
0.1*FLC
60 Locked rotor current (2.512.0 times FLC)
107 Get/Set th_alarm (#25) BOOL 01 0=OFF 0 Thermal warning, on/off
108 Get/Set th_al_le (#26) USINT 5099 % 75 Thermal warning level