Owner manual

Operations 4–7
Publication 800-UM001A-EN-P – June 2004
OUTPUT BYTE
Error Mode
Errors are critical and non-critical.
See the troubleshooting chart in Chapter 5 for details on how to
recover from an error.
Resetting the Device
To reset the 800E/F DeviceNet Pendant Station, you must cycle
power to the unit or disconnect and reconnect the DeviceNet
Cabling.
Bit Number Function When = 1 Function When = 0
7 N/A N/A
6 N/A N/A
5 N/A N/A
4 N/A N/A
3 N/A N/A
2 N/A N/A
1 N/A N/A
0 Output 1 Execute Output 1 Idle
Error Type Description
Critical (non-recoverable)
Failure of diagnostic tests during power-up/reset mode
Duplicate node address detected
Non-Critical (recoverable) I/O connection timeout