Manual

Rockwell Automation Publication RA-IN022A-EN-P – August 2009 1

Installation Instructions

Control Pod and Power Interface Cable

Control Pod Power Interface Cable

SK-R1-POD1 SK-R1-PC1

L1 L2 L3

DC+ DC–

12V

24V

115V

–

All

rames

90°

IP20, NEMA/UL Type Open

(Frame 4 shown)

IP54, NEMA/UL Type 12

IP20, NEMA/UL Type Open

(Frame 6 shown)

Frames 2…3

Frames 4…5

PAGE 1
Installation Instructions Control Pod and Power Interface Cable Control Pod SK-R1-POD1 Power Interface Cable SK-R1-PC1 Control Pod – All Frames 1 L1 L2 L3 2 I IP20, NEMA/UL Type Open IP54, NEMA/UL Type 12 O 3 0V DC+ DC– 0V (Frame 4 shown) 5V 12V 24V 115V 90° (Frame 6 shown) IP20, NEMA/UL Type Open 4 Frames 2…3 Frames 4…5 Rockwell Automation Publication RA-IN022A-EN-P – August 2009 1
PAGE 2
Control Pod – All Frames 5 Fan: For Frames 2 and 3 the fan can be disconnected in this step. Frames 4 and 5 see Step 4. Important: Be sure to reconnect fans to help prevent overheating. Top backplane if present. T20 T15 1.36 N•m (12 lb•in) 0.45 N•m (4 lb•in) 6 T15 T20 1.36 N•m (12 lb•in) 2.6 N•m (23 lb•in) Frame 6 Only T20 1.81 N•m (16 lb•in) Frames 2…5 2 Rockwell Automation Publication RA-IN022A-EN-P – August 2009 T20 1.
PAGE 3
Power Interface Cable – All Frames 5 0.
PAGE 4
Power Interface Cable – All Frames 6 *PN-41906* PN-41906 www.rockwellautomation.com Power, Control and Information Solutions Headquarters Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204 USA,Tel: (1) 414.382.2000, Fax: (1) 414.382.