Manual

5-128 Component Definition and Maintenance
7000A-RM001A-EN-P – January 2011 7000 “A” Frame
- Click Yes, and you will be prompted to save the connection.
- Click Yes to terminate the HyperTerminal Program.
3. Printing Control Data
- Restart HyperTerminal program.
- At the ‘Connection Description’ window as shown below, click
Cancel.
- From the File menu, click Open… The Open window will
appear. Locate the HyperTerminal connection that you just
created in step-2 above (ForGe_CONNECTION in this
example) and then click Open.
Printing (Uploading)
Control Data
(cont.)