Manual

5-126 Component Definition and Maintenance
7000A-RM001A-EN-P – January 2011 7000 “A” Frame
Here is a typical pin out of a complete null-modem cable. Essentially,
only 3 pins (2, 3 and 5) are all that is required.
Method
1. Connect your laptop to the drive using a 9-pin null-modem cable
to DPM data port (J4).
2. Set up HyperTerminal connection
- Run HyperTerminal program
- At the ‘Connection Description’ window, enter any name for
new connection under the Name field as shown below and then
click OK.
- The ‘Connect to’ window will appear as shown below. Select
COM1 from the dropdown list next to ‘Connect using’ and then
click OK.
Printing (Uploading)
Control Data
(cont.)