Manual

5-122 Component Definition and Maintenance
7000A-RM001A-EN-P – January 2011 7000 “A” Frame
- Click Yes. At this point, you will be prompted to save the session.
- Click Yes to terminate the HyperTerminal program.
Step-3: Uploading the Data from the drive
Now, that you have created an empty notepad file and setup
HyperTerminal connection, you are ready to upload the data from the
drive.
- Connect a null-modem cable between your computer’s serial port and
the serial port ‘J11’ on the Analog Control Board (ACB).
- Restart HyperTerminal program. On the ‘Connection Description’
window click Cancel.
Printing (Uploading)
Data from the Drive
(
cont.
)