Manual

Component Definition and Maintenance 5-115
7000 “A” Frame 7000A-RM001A-EN-P – January 2011
7. Enter the parameter linear number (in our example we have entered
569) and then press Enter key. Once you press the Enter key, the
parameter description will appears on the screen as shown in the
picture below.
8. Press Enter key again. The display will change to the ‘Diagnostics
Setup’ screen and the desired parameter gets assigned to Trace 1.
Now, press the down arrow key to move the cursor to Trace 2 and
repeat steps 3 – 8 above to assign a parameter to Trace 2.