Manual

3-42 Operator Interface
7000A-RM001A-EN-P – January 2011 7000 “A” Frame
Figure 3.54 – AC O/V Removed From List
Figure 3.55 – AC O/V Now Enabled
The changes to the fault masks do not take effect until the screen is
exited via the [F10] key, i.e. exiting the FAULTS OVERVIEW will
change the masks in the drive as will exiting the FAULTS SETUP
screen. In our example, exiting the FAULTS OVERVIEW screen
and returning to the FAULTS SETUP screen now shows the “AC
O/V” mask as being ON (Figure 3.56).
Figure 3.56 – AC O/V Mask is ON